Aksum the African Iron Age Kingdom

Aksum the African Iron Age Kingdom Aksum (also spelled Axum or Aksoum) is the name of a powerful urban Iron Age Kingdom in Ethiopia that flourished between the first century BC and the 7th/8th centuries AD. The Aksum kingdom is sometimes known as the Axumite civilization.   The Axumite civilization was a Coptic pre-Christian state in Ethiopia, from about AD 100-800. The Axumites were known for massive stone stelae, copper coinage, and the importance of their large, influential port on the Red Sea, Aksum. Aksum was an extensive state, with a farming economy, and deeply involved in trade by the first century AD with the Roman empire. After Meroe shut down, Aksum controlled trading between Arabia and Sudan, including goods such as ivory, skins, and manufactured luxury goods. Axumite architecture is a blend of Ethiopian and South Arabian cultural elements. The modern city of Aksum is located in the northeastern portion of what is now the central Tigray in northern Ethiopia, on the horn of Africa. It lies high on a plateau 2200 m (7200 ft) above sea level, and in its heyday, its region of influence included both sides of the Red Sea. An early text shows that trade on the Red Sea coast was active as early as the 1st century BC. During the first century AD, Aksum began a rapid rise to prominence, trading its agricultural resources and its gold and ivory through the port of Adulis into the Red Sea trade network and thence to the Roman Empire. Trade through Adulis connected eastward to India as well, providing Aksum and its rulers a profitable connection between Rome and the east. Aksum Chronology Post-Aksumite after ~AD 700 - 76 Sites: Maryam SionLate Aksumite ~AD 550-700 - 30 Sites: Kidane MehretMiddle Aksumite ~AD 400/450-550 - 40 Sites: Kidane MehretClassic Aksumite ~AD 150-400/450 - 110 Sites: LP 37, TgLM 98, Kidane MehretEarly Aksumite ~50 BC-AD 150 - 130 Sites: Mai Agam, TgLM 143, MataraProto-Aksumite ~400-50 BC - 34 Sites: Bieta Giyorgis, Ona NagastPre-Aksumite ~700-400 BC - 16 known sites, including  Seglamen, Kidane Mehret, Hwalti, Melka, LP56 (but see discussion at Yeha) The Rise of Aksum The earliest monumental architecture indicating the beginnings of the polity of Aksum has been identified at Bieta Giyorgis hill, near Aksum, beginning about 400 BC (the Proto-Aksumite period). There, archaeologists have also found elite tombs and some administrative artifacts. The settlement pattern also speaks to the societal complexity, with a large elite cemetery located on the hilltop, and small scattered settlements below. The first monumental building with semi-subterranean rectangular rooms is Ona Nagast, a building that continued in importance through the Early Aksumite period. Proto-Aksumite burials were simple pit graves covered with platforms and marked with pointed stones, pillars or flat slabs between 2-3 meters high. By the late proto-Aksumite period, the tombs were elaborated pit-graves, with more grave goods and stelae suggesting that a dominant lineage had taken control. These monoliths were 4-5 meters (13-16 feet) high, with a notch in the top. Evidence of the growing power of social elites is seen at Aksum and Matara by the first century BC, such as monumental elite architecture, elite tombs with monumental stele and royal thrones. Settlements during this period began to include towns, villages, and isolated hamlets. After Christianity was introduced ~350 AD, monasteries and churches were added to the settlement pattern, and full-fledged urbanism was in place by 1000 AD. Aksum at its Height By the 6th century AD, a stratified society was in place in Aksum, with an upper elite of kings and nobles, a lower elite of lower-status nobles and wealthy farmers, and ordinary people including farmers and craftsman. Palaces at Aksum were at their peak in size, and funerary monuments for the royal elite were quite elaborate. A royal cemetery was in use at Aksum, with rock-cut multi-chambered shaft tombs and pointed stelae. Some underground rock-cut tombs (hypogeum) were constructed with large multi-storied superstructures. Coins, stone and clay seals and pottery tokens were used. Aksum and the Written Histories One reason we know what we do about Aksum is the importance placed on written documents by its rulers, particularly Ezana or Aezianas. The oldest securely dated manuscripts in Ethiopia are from the 6th and 7th centuries AD; but evidence for parchment paper (paper made from animal skins or leather, not the same as parchment paper used in modern cooking) production in the region dates to the 8th century BC, at the site of Seglamen in western Tigray. Phillipson (2013) suggests a scriptorium or scribal school may have been located here, with contacts between the region and the Nile Valley. During the early 4th century AD, Ezana spread his realm north and east, conquering the Nile Valley realm of Meroe and thus becoming ruler over part of both Asia and Africa. He constructed much of the monumental architecture of Aksum, including a reported 100 stone obelisks, the tallest of which weighed over 500 tons and loomed 30 m (100 ft) over the cemetery in which it stood. Ezana is also known for converting much of Ethiopia to Christianity, around 330 AD. Legend has it that the Ark of the Covenant containing the remnants of the 10 commandments of Moses was brought to Aksum, and Coptic monks have protected it ever since. Aksum flourished until the 6th century AD, maintaining its trade connections and a high literacy rate, minting its own coins, and building monumental architecture. With the rise of the Islamic civilization in the 7th century AD, the Arabic world redrew the map of Asia and excluded the Axumite civilization from its trade network; Aksum fell in importance. For the most part, the obelisks built by Ezana were destroyed; with one exception, which was looted in the 1930s by Benito Mussolini, and erected in Rome. In late April 2005, Aksums obelisk was returned to Ethiopia. Archaeological Studies at Aksum Archaeological excavations at Aksum were first undertaken by Enno Littman in 1906  and concentrated on the monuments and the elite cemeteries. The British Institute in Eastern Africa excavated at Aksum beginning in the 1970s, under the direction of Neville Chittick and his student, Stuart Munro-Hay. More recently the Italian Archaeological Expedition at Aksum has been led by Rodolfo Fattovich of the University of Naples ‘L’Orientale’, finding several hundreds of new sites in the Aksum area. Sources Fattovich, Rodolfo. Reconsidering Yeha, c. 800–400 BC. African Archaeological Review, Volume 26, Issue 4, SpringerLink, January 28, 2010. Fattovich, Rodolfo. The Development of Ancient States in the Northern Horn of Africa, c. 3000 BC–AD 1000: An Archaeological Outline. Journal of World Prehistory, Volume 23, Issue 3, SpringerLink, October 14, 2010. Fattovich R, Berhe H, Phillipson L, Sernicola L, Kribus B, Gaudiello M, and Barbarino M. 2010. Archaeological Expedition at Aksum (Ethiopia) of the University of Naples LOrientale - 2010 Field Season: Seglamen. Naples: Universit degli studi di Napoli LOrientale. French, Charles. Expanding the research parameters of geoarchaeology: case studies from Aksum in Ethiopia and Haryana in India. Archaeological and Anthropological Sciences, Federica Sulas, Cameron A. Petrie, ResearchGate, March 2014. Graniglia M, Ferrandino G, Palomba A, Sernicola L, Zollo G, DAndrea A, Fattovich R, and Manzo A. 2015. Dynamics of the Settlement Pattern in the Aksum Area (800-400 BC): An ABM Preliminary Approach. In: Campana S, Scopigno R, Carpentiero G, and Cirillo M, editors. CAA 2015: Keep the Revolution Going. University of Siena Archaeopress Publishing Ltd. p 473-478. Phillipson, Laurel. Lithic Artefacts as a Source of Cultural, Social and Economic Information: the evidence from Aksum, Ethiopia. African Archaeological Review, Volume 26, Issue 1, SpringerLink, March 2009. Phillipson, Laurel. Parchment Production in the First Millennium BC at Seglamen, Northern Ethiopia. The African Archaeological Review, Vol. 30, No. 3, JSTOR, September 2013. Yule P. 2013. A Late Antique Christian king from ?afar, southern Arabia. Antiquity 87(338):1124-1135.

B300 TMA02 Essay Example | Topics and Well Written Essays - 1750 words

B300 TMA02 - Essay Example Whereas the earlier playing field was politics, government and fiefdom, the current stage is one of business and industry. The new science of management is no different from the old art of governance Mintzberg (1998) has described that rational process of analysis and planning takes a backseat and hard bargaining is the ploy used by corporate elites for obtaining strategic and tactical advantages. It is exercise of raw power that moves and prevails on decisions. Indeed the icons of industry are becoming cult figures and are aggrandized as the new architects of strategy. These leaders and managers who engage in strategy are closely involved in directing resources towards organizational goals that they have set. They use innovative technologies and make impact on society and its norms. In an earlier article Mintzberg and Winters (1985) have described five kinds of strategies deployed by leaders. They have named their models as, emergent, intended, deliberate, realized and unrealized. It is logically explained that the emergent strategy is a response to an opportunity and is a highly localized event. The intended one is more rationalized and a result of specific situations that require specific planning. The deliberate strategy is an extension of intended ones but more broadly conceived as a process that will result in either creating new strategies or will be able to face new challenges. The realized strategy is the culmination of the final deliberate strategy and the unrealized is the one that emerges as a different strategy when meeting new challenges. In fact these five strategies as the spectrum that demonstrates the two extremes and what lies between them when strategies are planned and are useful to the extent that they show the intensity of the strategy evolution process. However the authors say that there are still several types of strategies that lie between these extremes. 1. The

Launching Brazilian Carnival Coffee in the USA Term Paper

Launching Brazilian Carnival Coffee in the USA - Term Paper Example Talking in more broader terms, it can be said that from the benefits point of view, right from the early days of this decade, there has been a tremendous boom in technology with the evolution and widespread diffusion of internet connectivity which has significantly helped in the process of eliminating the difference arising from geographical barriers as well as regional time differences. This has automatically led to the rise in competition in various market places around the world, since the countries have become easily available to operate and work with, because of the high level of secured connectivity provided through the usage of various technological devices connected through the internet. On the challenge perspective, it can be said that due to the ease of access to various countries around the globe, business organizations of various countries around the world are focusing on the process of expanding their business processes around the world and thereby achieve significant gr owth in the business process. Talking in that particular aspect, it can be said that the increasing interest of various multinational organizations around the world to enter in newer markets which provides significant growth potential in future is resulting to the opening of various markets by the process of lowering of interest rates, which is helping in attracting foreign investments in the emerging and newer markets. This factor along with various other economical, social and physical factors which are focused in the process of attracting investments is playing a direct role in the rise of challenges for operating in new environments and markets. While talking about entering new markets, it can be said that there is a culture factor that plays a major role in the process of determining the probability of success for a product in a particular market. Talking from the culture point of view, it can be said that as a result of the prolonged economic crisis of the West, which continue s to hamper the economic prospects of US by the process of slowing of demand of products and services, the population of the US is focusing on working overtime as well as balancing multiple jobs in an attempt to manage their cost expenses as well as maintain their lifestyle in these challenging times (*). As a natural fact, the population of US is highly dependent on a stimulating drink, which will help them in giving more output, and thereby will be ability to increase individual productivity. From the statistical aspect, it can be said that the US has a population of over 313,000,000 (Cia.gov, 2012). Talking in terms of defining coffee consumption trends in the US, it can be said that over 50% of the entire population of US are dependent on some variants of coffee, which makes up an essential part of their daily life (Harvard School of Public Health, 2009). The coffee consumption in the US has increased over 7% on a year on year basis in the year 2012 (ncausa.org b, 2012). Apart f rom the realization of the various health related benefits that coffee consumers gets, the increase in coffee consumption in the US market can be further attached to the process of increased coffee intake of coffee consumers belonging to the Hispanic communities of the US (ncausa a.org, 2012). Analyzing the country in terms of customs laws that will be applicable for the purpose of importing and international sourcing of coffee in the US, it can

Spectrometry Types and Applications

Spectrometry Types and Applications Spectrophotometry is the quantifiable study of interaction of electromagnetic radiations with the matter. Electromagnetic radiations do not require any medium for its transmission. It consists of two components, electric and magnetic field. Spectrophotometry involves the use of a spectrophotometer. A spectrophotometer is a photometer (a device for measuring light intensity) that can measure intensity as a function of the color (or more specifically the wavelength) of light. Spectrophotometry is the spectroscopic technique used to assess the concentration or amount of a given species. Spectrophotometer makes use of the transmission of light through a solution to determine the concentration of a solute within the solution. It is often used in physical and analytical chemistry for the identification/characterization of substances through the spectrum emitted from or absorbed by them. It is also used to examine the behavior of chemical substances after electromagnetic irradiation such as gamma rays, X-rays, ultra violet rays, infrared rays, radio waves and microwaves. It gives detailed information about inter-molecular bonding types or molecular changes occurring during enzymatic reactions and mitochondrial electron transport chain. Qualitative and quantitative measurement of biomolecules even in impure samples can be done rapidly and conveniently. Uses: To determine the molecular structure To estimate the energy levels of the ions and complexes in a chemical system along with the compositions. To get an idea regarding absorption and emission details of the specimen To understand the intrinsic configuration and relative association and chemical shifts Determine the wavelength of maximum absorbance. UV-Visible Spectroscopy: UV-visible spectroscopy investigates the interactions between ultraviolet or visible electromagnetic radiation and matter. Ultraviolet and visible spectroscopy (UV-vis) is a reliable and accurate analytical laboratory assessment procedure that allows for the analysis of a substance. Specifically, ultraviolet and visible spectroscopy measures the absorption, transmission and emission of ultraviolet and visible light wavelengths by matter. UV-visible spectroscopic measurements provide precise information about atomic and molecular structure. It consists of light of several colors ranging from violet to red. This is now termed the UV-visible electromagnetic spectrum. The ultraviolet and visible regions of the electromagnetic spectrum are linked in UV-vis spectroscopy because similarities between the two regions allow many of the same research techniques and tools to be used for both regions. The ultraviolet region (about 450-200 nm) is particularly important for the qualitative and quantitative determination of many organic compounds. In the visible region (about 450-700 nm), spectrophotometric methods are widely used for the quantitative determination of many trace substances, especially inorganic species. Special instrumentation is used in UV-vis spectroscopy. Hydrogen or deuterium lights provide the source of light for ultraviolet measurements. Tungsten lamps provide the light for visible measurements. These light sources generate light at specific wavelengths. Deuterium lamps generate light in the UV range (190 to 380nm). Tungsten-halogen lamps generate light in the visible spectrum (380 to about 800 nm).Xenon lamps which can produce light in the UV and visible portions of the spectrum are used to measure both UV and visible spectra. Uses: Uv/Vis Spectrophotometry is used to determine the absorption or transmission of Uv/Vis light (180 to 820 nm) by a sample. It can also be used to measure concentrations of absorbing materials based on developed calibration curves of the material. It is routinely used in the quantitative determination of solutions of transition metal ions and highly conjugated organic compounds. Its main applications are; Quantitative determination of chromophores concentrations in solution Impurity determination by spectrum subtraction Determination of reaction kinetics Fluorescence Spectroscopy: Fluorescence spectroscopy, fluorometry or spectrofluorometry, is a type of electromagnetic spectroscopy which analyzes fluorescence from a sample.Fluorescence occurs when a molecule absorbs photons from the U.V.-visible light spectrum (200-900 nm), causing transition to a high-energy electronic state and then emits photons as it returns to its initial state, in less than 10-9 sec. Fluorimetry characterizes the relationship between absorbed and emitted photons at specified wavelengths. It is a precise quantitative analytical technique that is inexpensive and easily mastered. Fluorescence spectroscopy is an important investigational tool in many areas of analytical science, due to its extremely high sensitivity and selectivity. With many uses across a broad range of chemical, biochemical and medical research, it has become an essential investigational technique allowing detailed, real-time observation of the structure and dynamics of intact biological systems with extremely high resolu tion. It is particularly heavily used in the pharmaceutical industry where it has almost completely replaced radiochemical labelling. Fluorescent compounds or fluorophors can be identified and quantified on the basis of their excitation and emission properties. The excitation and emission properties of a compound are fixed, for a given instrument and environmental condition, and can be used for identification and quantification. The principal advantage of fluorescence over radioactivity and absorption spectroscopy is the ability to separate compounds on the basis of either their excitation or emission spectra, as opposed to a single spectra. This advantage is further enhanced by commercial fluorescent dyes that have narrow and distinctly separated excitation and emission spectra. The sensitivity of fluorescence is approximately 1,000 times greater than absorption spectrophotometric methods. Uses: Fluorescence spectroscopy is used in, among others, biochemical, medical, and chemical research fields for analyzing organic compounds. There has also been a report of its use in differentiating malignant, bashful skin tumors from benign.In particular, the measurements of fluorescence spectrum, lifetime and polarization are powerful methods of studying biological structure and function. The fluorescence spectrum is highly sensitive to the biochemical environment of the fluorophor. Fluorophors have been designed such that their spectra change as a function of the concentration of metabolites, such as pH and calcium. A major disadvantage of fluorescence is the sensitivity of fluorescence intensity to fluctuations in pH and temperature. Flame Photometry: Flame photometry (more accurately called flame atomic emission spectrometry) is a branch of atomic spectroscopy in which the species examined in the spectrometer are in the form of atoms. Flame photometry is suitable for qualitative and quantitative determination of several cations in biological specimens, especially for metals that are easily excited to higher energy levels at a relatively low flame temperature (mainly Na, K, Rb, Cs, Ca, Ba, and Cu). This technique uses a flame that evaporates the solvent and also sublimates and atomizes the metal and then excites a valence electron to an upper energy state. Light is emitted at characteristic wavelengths for each metal as the electron returns to the ground state that makes qualitative determination possible. Flame photometers use optical filters to monitor for the selected emission wavelength produced by the analyte species. Comparison of emission intensities of unknowns to either that of standard solutions or to those of an interna l standard allows quantitative analysis of the analyte metal in the sample solution. Because of the very narrow and characteristic emission lines from the gas-phase atoms in the flame plasma, the method is relatively free of interferences from other elements. Flame photometry has many advantages. It is a simple, relatively inexpensive, high sample throughput method used for clinical, biological, and environmental analysis. The flame photometers are relatively simply instruments. There is no need for source of light, since it is the measured constituent of the sample that is emitting the light. The energy that is needed for the excitation is provided by the temperature of the flame (2000-3000  °C), produced by the burning of acetylene or natural gas (or propane-butane gas) in the presence of air or oxygen. By the heat of the flame and the effect of the reducing gas (fuel), molecules and ions of the sample species are decomposed and reduced to give atoms, e.g.: Na+ + e- à ¯Ã†â€™Ã‚  Na. Atoms in the vapour state give line spectra. (Not band spectra, because there are no covalent bonds hence there are not any vibrational sub-levels to cause broadening). The mono chromator selects the suitable (characteristic) wavelength of the emitted light. The emitted light reaches the detector. This is a photomultiplier producing an electric signal proportional to the intensity of emitted light. Atomic Absorption Spectrometry: In analytical chemistry, atomic absorption spectroscopy is a technique for determining the concentration of a particular metal element in a sample. The technique can be used to analyze the concentration of over 70 different metals in a solution. The technique makes use of absorption spectrometry to assess the concentration of an analyte in a sample. Atomic absorption spectroscopy (AAS) determines the presence of metals in liquid samples. Metals include Fe, Cu, Al, Pb, Ca, Zn, Cd and many more. It also measures the concentrations of metals in the samples. Typical concentrations range in the low mg/L range. The electrons of the atoms in the atomizer can be promoted to higher orbitals for a short amount of time by absorbing a light of a given wavelength. This amount of energy (or wavelength) is specific to a particular electron transition in a particular element, and in general, each wavelength corresponds to only one element. This gives the technique its elemental selectivity. In order to analyze a sample for its atomic constituents, it has to be atomized. The sample should then be illuminated by light. The light transmitted is finally measured by a detector. The light source is usually a hollow-cathode lamp of the element that is being measured. Lasers are also used in research instruments. Since lasers are intense enough to excite atoms to higher energy levels. The disadvantage of these narrow-band light sources is that only one element is measurable at a time. AA spectroscopy requires that the analyte atoms be in the gas phase. Ions or atoms in a sample must undergo desolvation and vaporization in a high-temperature source such as a flame or graphite furnace. Flame AA can only analyze solutions, while graphite furnace AA can accept solutions, slurries, or solid samples. The graphite furnace has several advantages over a flame. It is a much more efficient atomizer than a flame and it can directly accept very small absolute quantities of sample. It also p rovides a reducing environment for easily oxidized elements. Samples are placed directly in the graphite furnace and the furnace is electrically heated in several steps to dry the sample, ash organic matter, and vaporize the analyte atoms. AA spectrometers use monochromators and detectors for uv and visible light. The main purpose of the monochromator is to isolate the absorption line from background light due to interferences. Simple dedicated AA instruments often replace the monochromator with a bandpass interference filter.

Response proposing leadership styles Essay

1. (TCO 3) Prepare a five to seven paragraph response proposing leadership styles you would recommend for the Denver Airport Project. Please choose a combination (two or three) of the eight leadership styles presented in the Thompson textbook (Chapter 11: Leadership: Managing the Paradox). Please note that you are to also use three other sources from the internet or the DeVry online library. All sources must be cited. (Points : 30) Based on the reading it is hard to give a single leadership style or even a combination of leadership styles because there are so many different levels of productions and management for this project. Each level of management will have their own required type of leadership and while some styles may overlap, there will be differences for each level. For a project this large you are more than likely to run in to just about every type of leadership style at some point. When we start at the top you see that there is a Collaborative Leadership between the City, Greiner Engineering, and Morrison-Knudsen Engineering. Collaborative leaderships work well but even with a collaborative leadership there needs to be an organizer that directs the flow of discussions and determines outcomes in the event of a stalemate. This is not discussed in the passage and it is not determined who has the final say. Typically this would be the city since they are the owners but in many cases it also depends on the how contracts are written. While in the long run the city can make the final decision depending on the way the contract is written the city may have to pay to make those decisions. Without more information on the contract with the city and the engineering firms we cannot confirm if it is a true collaborative leadership. But there are other aspects that are brought up that bring up more concerns with the management systems used. While it appears to would be a collaborative leadership it does not seem as if everyone is on board with the same ideas. By separating the design and the functionality we run into issues that were not properly discussed ahead of time. In this case a democratic leader would be helpful to facilitate discussions among the different groups. Furthermore when there is an issue over function verse design the democratic leader can help to facilitate a compromise that works  for everyone. It does not appear as if there is any leadership helping to give direction. As you read through the passage it appears that instead of a collaborative leadership we have a delegating leadership in which the city tells everyone what they are looking for and then leaves it up to them to take care of it from there. Based on the passage it almost seems at times that the city has a laissez-faire style w hich on allows for more problems to arise. These changes and issues only slow the design and in turn would slow construction. This is evident with how the baggage system was handled. First due to the lack of leadership in the planning phase the baggage system was started way too late in the project life cycle. This falls back on the fact there was not enough active leadership in the planning phase. This also falls on the fact the risk management did not seem to pick up on this either. While it falls on the leaders risk management on this project was broken down only slightly and in turn left a wide variety of situations and issues undiscussed. This goes back to active leadership in which there does not appear to be anyone going back an asking question and looking to the future to see what issues may come up. Too many people appeared too tied up with the here and now and nobody had the foresight to look ahead to see what issues were coming. I did find it interesting that risk analysis was only broken down into cost, human resources, and bad weather. While I would agree that these three areas are important and needed to be address, I am surprised the equipment and materials were not on the list. While the three listed are concerns for most projects, I cannot remember the last time I was on a project where equipment and material deliveries were not areas of concern to be addressed. I was even more surprised to see in the November 1994 passage that they went a while without a risk manager especially given all the issues they had already run into. Again I would say that there is a lack of leadership and the city needed to take a more active role but at the same time that leadership needs to be a cooperation with all the major players so that everyone can get on the same page and help each other to identify issues like the baggage before it became an issue. On a side note I would say that I do believe that they did well with their choice in regards their choice of leaders for the movement of equipment between airports as described in the Sept. 1993 section. Using a person with military leadership for this type of move is a wise choice in my opinion. Given the complexity and time restraints of this type of move there is not a lot of room for error. The military is good about training leader that are willing to take recommendations when there is time for it and will to make decisions when there is no time. In this case with the complexity it would have taken a team to come up with the plan but when the plan is over and the move starts you need people that can think quickly and adjust to unknown issues as they come up. There is often no time for discussions because in this case ever second wasted only causes more delays. But as I said in the beginning there are several different types of leadership styles that take place on a project like this. While I have discussed the upper areas a management there are several areas were team building, mentoring, and other leadership requirements are needed more. People often look at the top for how a project is managed but in this case how the contractor and leaders near the bottom manager there people is sometime more important. So while a cooperative group of leaders that were more active would have been ok for the top it would not have worked for many of the lower levels. Reference Thompson, Leigh L.. Making the Team: A Guide for Managers, 4th Edition. Pearson Learning Solutions. . Kerzner, Harold. (  © 2004). Advanced project management: best practices on implementation, second edition. [Books24x7 version] Available from http://common.books24x7.com.proxy.devry.edu/toc.aspx?bookid=17176. Nutt, Paul C.. (  © 2002). Why decisions fail: avoiding the blunders and traps that lead to debacles. [Books24x7 version] Available from http://common.books24x7.com.proxy.devry.edu/toc.aspx?bookid=42601. Forster, Nick. (  © 2005). Maximum performance: a practical guide to leading and managing people at work. [Books24x7 version] Available from http://common.books24x7.com.proxy.devry.edu/toc.aspx?bookid=22402. Denver International Airport Baggage H andling System – An illustration of ineffectual decision making . (2008). Calleam Consulting Ltd. from http://calleam.com/WTPF/wp-content/uploads/articles/DIABaggage.pdf

What Does It Mean At Be Educated - 1007 Words

Choices can make or break us depending on what we do. That is what Jon Spayde attempts to convey to his audience in his 1998 Unte Reader article, â€Å"What Does it Mean to Be Educated?† He goes through many examples and arguments that could possible answer this â€Å"surprisingly tricky and two-sided question† (Spayde paragraph 1). Although the actual arguments he poses throughout his article, he uses the rhetorical devices – ethos, pathos and logos, to get his readers to accept his purpose. First, Spayde uses pathos to reach to his audience. The most important technique he uses is his delayed thesis: â€Å"To fall short of you highest goals†¦is okay as long as you stuck to the struggle. And the joy† (Spayde paragraph 21). Unlike most articles where the thesis is somewhere near the beginning of the text, he strategically places his as the last sentence. Even though he may have had a reason placing it at the mere end, one may argue that the placement is wrong. After reading the entire article and coming to that as a conclusion, the article finally becomes clear. He may have had a doubt that not everyone would understand and accept his point of view, that proving himself was his largest concern. Spayde didn’t entrust just his delayed thesis to assist in proving his argument; he included analogies. In paragraph 7, he spoke about the differences between a college dropout earning less money and a high school dropout earning more. This example was used to p ersuade his audience that thoseShow MoreRelatedWhat Does it Mean to Be Educated?919 Words   |  4 Pagesï » ¿Alfie Kohn on education: What does it mean to be educated? According to Alfie Kohns essay The dangerous myth of grade inflation, one of the most commonly-cited truisms in education today is that higher education is easier than it was in the past. Critics contend that grades have become puffed up while student performance has actually weakened. Kohn believes this is a culturally-produced myth rather than a statistically justified reality. In fact, the notion that grades were less generouslyRead MoreWhat Does It Mean to Be Well Educated1525 Words   |  7 PagesGetting an A Doesnt Mean I am Well Educated Abstract Whether or not a person is well educated is not an easy question to answer. There are several things to consider when answering this question. Some people look to their grades, level of completion, or what school they attended. Others look at their ability to interact with others in society and consider issues such as philosophy, politics or religion. While these are all common criteria for measuring ones education, a person ought not toRead MoreWhat Does It Mean to Be Well Educated878 Words   |  4 Pagessocial, political and economic factors that often go beyond the local context. In the light of above it become more complex to define the contextual meaning of â€Å"Well educated† The product coming out from our schools, colleges and universities are placed correctly under the category of â€Å"well informed† rather than â€Å"well educated.† Alfie Kohn is one of my favourite writers. He is leading , insightful and sometimes controversial force in working to improve our education system. He has written andRead MoreWhat Does It Mean to Be Well Educated Essay1027 Words   |  5 PagesGregorio Roblesvelez Prof. Hartless English101 04 April 2013 What Does It Mean to Be Well Educated? What does it mean to be well educated? To be well educated it is a balance between academics and practical knowledge. Throughout this paper I will show that one does not necessarily need a college degree to be deemed as well educated. I will explore both aspects of academics and practical knowledge and how it affects individuals. Practical knowledge is the knowledge that we acquire as smallRead MoreWhat Does It Mean You Be Well Educated?1002 Words   |  5 Pages What Does It Mean to Be Well-Educated? Lucy A. Grullon Liberty University. APA style Introduction Learning doctrines play a vital role in today’s competitive business industry especially in the rouse of new ways to form and conduct companies. Education is more than to learn or memorize files, even though commonly confused as such. Education you simply have it or not. I believe that be educated means that you have the skill to think analytically, and to accept and reconnoiter differentRead MoreEssay about What Does It Mean to Be Well Educated?800 Words   |  4 PagesTo opinionate or to be opinionated as defined by Webster means to have an unduly adhering to ones own opinion or to preconceived notions. In â€Å"laymen’s termsâ€Å" basically it is to strongly stick to one’s own point of view. If education is so vast than how can someone be â€Å"well† at it? ~Kohn reveals that his wife who is a physician is hesitant at times reciting multiplication. This does not mean she is uneducated when indeed she may be responsible for saving someone’s life. Yet because she cannot teachRead MoreWhat Does It Mean You Be Well Educated By Alfie Kohn Essay2188 Words   |  9 Pages In his essay â€Å"What Does It Mean To Be Well-Educated,† Alfie Kohn challenges the current standards that people consider crucial in order for a person to be considered well-educated and explores some interesting questions that help provide the reader with a completely different understanding, perspective, and possibility for standards of good education. At the beginning, Kohn explains how people can argue about the purpose of education, but then fail to realize and recognize whether or not educationRead MoreAn Analysis Of Alfie Kohn s What Does It Mean You Be Well Educated Essay2253 Words   |  10 Pages Journal 4 passive In his essay â€Å"What Does It Mean To Be Well-Educated,† Alfie Kohn challenges the current standards that people consider crucial in order for a person to be considered well-educated and explores some interesting questions that help provide the reader with a completely different understanding of education. At the beginning, Kohn explains how people can argue about the purpose of education, but then fail to realize and recognizeRead MoreTo Be or Not to Be Well Educated1114 Words   |  5 PagesENG 101-D23 LUO Professor Desiree B. Sholes 11/12/2012 To be or not to be well-educated: A Narrative Response to Alfie Kohn’s â€Å"What does it mean to be well-educated?† To be or not to be well-educated: A Narrative Response to Alfie Kohn’s â€Å"What does it mean to be well-educated?† Alfie Kohn’s essay â€Å"What does it mean to be well-educated?† begins on a personal note using his wife as an example to substantiate his hypothesis. Encountering Alisa at the very beginningRead MoreIs It A Standardized Test?1191 Words   |  5 Pagesto decide what it means to be well educated? Does the phrase well educated refer to the quality of schooling you received or to something about you? Who gets to decide what it means? Is it a standardized test? Is it our test scores or memorization of facts? How much or how well we can remember at a given point in time? How much knowledge we ought to have? What could it possibly be? I think this society has given â€Å"Well Educated a poor definition. Sitting in a class for a long time does not make us

Are banks too big to fail in the economy - Free Essay Example

Sample details Pages: 15 Words: 4370 Downloads: 2 Date added: 2017/06/26 Category Economics Essay Type Research paper Did you like this example? In October 2008, as the impact of the global financial crisis, three largest commercial banks in Iceland, namely Glitnir, Landsbanki and Kaupthing successively placed into receivership by the government (Lyall, 2008), and forced to seek the International Monetary Fund bailout. However, the three banks represented 85% of total assets in the countrys banking system, along with the overseas assets, that was too big to rescue. As the consequences, the whole nation economic were sucked with banks into the whirlpool and the government has declared national bankruptcy later on. Don’t waste time! Our writers will create an original "Are banks too big to fail in the economy?" essay for you Create order However, it does not end; the citizens blamed government in the way of handling the crisis, followed by unprecedented wave of public protest. As the result, in January 2009 the government was forced to resign (Stringer, 2009). Up until the banking crisis, the three banks combined debt is six times the nations GDP of  £35billion which the amount is equal to  £116,000 owed to every single citizen in Iceland (Dailymail, 2008). It would be the one of the worse collapse in financial history. With the population of 300,000, the banks deeply involved in global financial activities before downturn, it brings the nation into bankruptcy. After the bankruptcy was announced, it has affected 420,000 British and Dutch customers, and bank assets which are frozen held by hospitals, police station, council and universities (Brogger, 2008). The bank collapse seems unreal. Everybody panicked when the Kroner dropped 58% by the end of November 2008 and inflation hit 19% by January 2009 (Onaran, 20 11). The failure has bought down the government and ruined the jobs opportunity. 1.1.1 OVERVIEW OF ICELANDIC BANKING SECTOR Iceland is said to be the smallest economy in the world that have its own currency and an adjustable exchange rate (Articlesbase, 2007). Icelanders were one of the citizens that enjoy a very high standard of living in the world. Its capita income, education, health care and life expectancy was rated as third highest in the world. (Lesova, Telegraph, 2008). GDP per capita was ranked 5th in the world in 2006 (go-to-iceland.com, 2006). The nation main activities are fishery and metals exports besides banking sector. In 1990s, Iceland decided to follow other small countries such as Switzerland and Luxembourg to develop their economic future in banking sector. Due to the government policies and deregulation in banking sector, in 2001, the banking mushroomed as a result of low interest rates and cheap money pumped by US Federal Reserve. Iceland expands their banks financial position almost eleven times their GDP amounted to $209billion (Onaran, 2011). Oddsson (cited in Onaran, 2011) n oted the countrys top three largest banks had created thousands of well-paid workers and handling most of the highest trade individuals and companies. 1.2 RESEARCH OBJECTIVES The fall of Icelandic three major banks in October 2008 was very rare, first time indeed, in financial history. Jensen (cited in Mail Online, 2008) pointed the effect of banking collapsed in Iceland has been way different than other country where it further cause the whole nation suffered in the crisis. This study investigated the perceived causes that led to the bankruptcy of Icelandic banks by setting the objectives as follow. To investigate whether the failure of Icelandic banks due to rapid expansion. To investigate whether the failure of Icelandic banks due to highly leveraged. To investigate whether the failure of Icelandic banks due to fraud. 1.3 RESEARCH QUESTIONS 1. Did rapid expansion cause Icelandic banks to fail? 2. Did leverage cause Icelandic banks to fail? 3. Did fraud cause Icelandic banks to fail? 1.4 SCOPE OF STUDY The study target on the three largest banks in Iceland, Kaupthing, Landsbanki, and Glitnir, which represent 85% of total assets in the countrys banking sector. Also focus on the factors that cause them failed. They are rapid expansion, leverage, and fraud. Besides, the recent global financial crisis was part of the study as well, which believed has bring significant impact on Iceland banking system. 1.5 SIGNIFICANCE OF STUDY Bank failure has a huge adverse effect on the economy and so the stability of banks is very significant. The collapse of the Icelandic banking system is the single biggest mistakes suffered by any country and the most comprehensive in the banking crisis history apart from the Lehman Brothers, in the recent financial crisis (Waibel, 2010). The total debts of the Icelandic banks are way too huge for the government to repay. The collapse of the three major banks in Iceland is the main driver which led to the nation bankrupts. This study is beneficial to identify the factors that can be avoided in assisting financial sector, academic sector and public for a better economy. Learning what went wrong is vital to strengthen the stability of economy. It can be realized that, Iceland case has greatly reported by newspapers and articles all around the world. Hence made many countries concern the possibility of their nation going bankrupt, they started to put more afford into banking sector in order to avoid such incident replay in their country. 1.6 THE ORGANISATION OF RESEARCH Chapter 1 is the introductory chapter where the objectives and importance of this study were raised to form a rationale behind the study. This chapter includes the background of three Icelandic banks, research questions, scope and significance of study. Chapter 2 analyzes on factors and analyzes on various theories on some of the factors that caused banks collapse. Factors will consist of rapid expansion, leverage and fraud. Chapter 3 is the research methodology which stated the methods that were used to carry out this study. This chapter included data collection, research design and theoretical framework. Chapter 4 is where empirical findings and case studies were gathered. Chapter 5 is where conclusions of this study were made. Besides, limitations of study and recommendations were also included in this chapter. CHAPTER 2 LITERATURE REVIEW 2.1 RAPID EXPANSION CAUSES BANK FAILURE Rapid expansion interprets as unusual growing rate, usually found in frequent transaction and excessive trading volumes in short period. In reality, business expansion is seen favourable in layman, as it likely to bring more profits into the business. However, looking back to history, it has shown that many companies filed bankruptcy as a result of uncontrolled growing rate. Financial journalists advice dont go aggressive, otherwise the business would expose to liquidity risk which leads to insolvency. In fact, dont we know the principle of too much water drowned the miller? The answer probably will be yes, we do know it well, most of the people are aware of the latency risk, but the reality is people always gone mad with the attractive outcome. Adams (2001) stressed its good to grow the business, but never ever set growth as the main objective of the business, as it can lead to failure. Generally, business expansion can be classified into two fields, namely internal growing and external growing. It is important to distinguish them especially in banking system. The internal growth of banks mainly refer to the organic growth itself, also the bank intention to issues more loans and thereby increases its loan portfolio. On the other hand, external growth comes from the form of buying assets, or acquisitions, joint venture, often within the same industry which has similar characteristic. Bank is passionate in increasing its lending portfolio. Lending is said to be the effective way for bank to expand its business. By lending out money, bank can earn higher interests through loan issued, thereby generate more income. Agricultural Bank of China (ABC) has reported high profit growth, backed by rapid lending expansion that has driven them into stock market listing. Its net profit has boom 13% to $49.7billion in 2009. Besides, its total assets amounted to 8.6trillion Yuan, evolved into the nation top bank. (cited in Wang, 2009). In addition, a research did in Lebanese banking sector shows its lending activity posting 23.1% growth to $34.9billion in 2010. It was said that the nations banking sector displayed a favourable performance with strong bank lending that can boost the declining inflows. (The Daily Star, 2011). A research conducted by Jayaratne and Strahan (1996) has proved that the bank lending in the United States contributes to the economic growth. Nevertheless, they pointed out that banks must be responsible to the loans issued. Blindly increased the volume of bank lending will bring negative impacts such as bankruptcy and should be discouraged. Regarding to this, some researchers has pointed out the fuse of recent recession was linked back to the banking deregulation since 1980s. The banking sector in the United States has gone through substantial deregulation. Most of the restrictions have been loosen, such as qualification for getting bank loans, limits of the bank transaction have been almost ignored and etc (Strahan, 2 003). In fact, there are many researches has been carried out as regard to the banking sector deregulation issue. The researchers often argue whether deregulation in the banking sector, especially those fast growing bank has affected the quality of the lending. As a result for banking deregulation, it created more competition in the sector. Keeley (cited in Carletti, 2005) found out the low margins of banks is the reason that encourage them to put themselves into higher risk in order to improve the profitability. However, higher risk will exposed them to higher chance of failure. Excessive internal growth will lead to lack of management and supervision; hence deteriorate the quality of the loans. A bad loan will make default to be easier (Report of the Special Investigation Commission, 2010). Generally, a loan that is not making income anymore to the lender is classified as non-performing loan in banking term. It is a default loan and can be defined as bad debts in the business ( Charles, 2010). Non-performing loan is recorded as a loss in banks income statement, and normally will cause the bank to distress when there is a large amount incurred, especially encounter crisis. For instance, before the US housing bubble burst in 2006, prices went up drastically which prompted a lot people, especially household and growing firms to borrow money from bank into real estate investment purpose. Due to the high demand, bank see it as an opportunity of earning more profits, it induced them to borrowed more money from outsiders and depositors, in turn issue loans to the people. Bank earns higher interest in this process. In practice, depositors are the banks creditors (Daily Champion, 2001). However, the large amounts of lending is likely to cause non-performing loan outburst during crisis, which cause the bank unable to collect back its debt and refinance to its creditor. The situation gets worse when the banks suffer bank run (sudden withdrawal by depositors). In t his case, the banks have to declared insolvency. An empirical study by Hou (n.d) has showed high level of non-performing loan that caused by over lending is the root that cause of bank collapse. He added non-performing loans caused by over lending can cause the economic bogged down. Furthermore, an investigation on loan growth and the riskiness conducted by Norden and Weber (2010) on 16,000 banks over 16 countries in year 1997 to 2007 has shown loan growth is an important factor of the banks risks. In China, the government punished some banks for their over lending transactions (Dealbook, 2010). On the other hand, the contributions of external growth shall be highlighted. In fact, the structure of external growth is much obvious and simple than internal growth, which is in the form of merger and acquisition. Yet, it is widely adopted and deemed as more efficient in achieving the business objectives than the former (Highbeam, 1997). One of the advantages is that it can help the business to realize maximum growth potential at the right pace, given that the internal growth pattern is limited or meet other constraints. However, it was said that the external growth has to be monitor closely to ensure the objectives of the banks is followed (Maughan, 2011). Hunger and Wheelen (cited in Grashaw, 2010) noted that most of the research concluded that the company growing through external growth does not perform financially well. Instead, company which depend on internal growth tend to present better financial position. This is due to mistimed or misjudged created during the takeover process. Generally, the risk associated with acquisitions is that too high a price is paid for the acquired asset. The situation gets worse when the crisis hits. For instance, the bank is paying big amount to acquire others assets during housing bubble period, this eventually cause them suffer a big losses when the price level has drops. This can be explained in the way that the inco me generated from its new assets is not equivalent to what had paid. In other word too high the price paid (Ngfl, 2007). In addition, the business has to find more sources to finance its new assets operations during this critical moment, which is seen as the main driver of running off the working capital. This is significant especially in the banking sector as it can cause chain effect which will eventually lead to liquidity distress. Recent studies have established that if merger and acquisitions in banks if allowed in a controlled manner would significantly reduce the bankruptcy risk of the merged entity (Scribd, n.d.). 2.2 LEVERAGE CAUSES BANK FAILURE Leverages root word lever is the French word which means to raise or to enhance. In finance term, it is an action or technique of raising capital to the existing business by borrowing. An entity that is engaged in borrowing money to finance the business is said to be leveraged. Typically, there are two ways of financing sources for a business to form its capital structure, through debt financing or equity financing. Most often, leveraging involves the issuances of financial instruments such as bonds, notes, debentures and preference shares. In exchange for lending money, the buyer (bonds holder) becomes the creditors to that particular entity (Raymond, 2011). They are entitled to receive interest until their loan redeemed. According to McLaney (2006), short term debt financing usually used to meet operating or regulatory requirements, the repayment due within five years time. While long term debt usually used by company to finance its long term project, due after five years. On the other hand, equity financing refer to the exchange of money to the business ownership particular in ordinary shares. This type of financing does not involve debt, the buyer (shareholders) will received dividend as the return when the business is making profits. However, this financing method is not likely to be used by most of the business entity, consider the issuance of new shares to new investors may dilute the ownership interest and reduction of controlling on the business ownership (Toolkit, 2011; Finance Website, 2009). Whats more, it is a demanding procedure for an entity to issue shares, time and the expenses incurred are relatively high. Therefore most of the companies nowadays prefer debt financing source rather than equity financing. Baker and Powell (2005) said managers prefer issuing debt securities rather than new shares when seeking for external financing sources. This is because debt financing leads to the increase of company value, while equity financing on t he contrary, will cause the company value drops. Traditionally, debt is a liability and deemed as something that is unfavourable to an entity which should be avoided. However, debt is seen favourable when being used properly. This was supported by CPA Thomas Emmerling, he said debt is always better than any other form of financing when comes to the cost of capital (cited in Franczyk, 2005). Rao (1989) in his book pointed out various advantages of debt financing to the business particular in: Interest payment on borrowing is regards as tax deductible Undilution of shareholding control Relatively low cost to issue debt than equity Function as business catalyst, boost business income Besides that, it benefits the entity by leverage little amount of debt which could eventually bring them more income (Rich Credit Debt Loan, 2011). Hence, the objective of the leverage is met, and that we call it positive leverage. Waggoner (2008) argues that the impact of leverage has to be understood. Leverage can provide an incentive to generate income. Therefore leverage, more specifically debts that applied is not necessarily bringing harm to the business. Besides of generating more income, debt leverage can also used to increase the entity net worth or cash flow. John Waskin, CEO of American Credit Counsellors said Good debt produces cash flow, and bad debt doesnt. He stressed on the using of debt leverage facility could create a lot of benefits to the business (Billion Dollar Income, 2010; Getlen, 2008). Hutchinson (2008) said leverage financing method become widespread in the banking sector. He explains the more assets they control, the more return they can earn. In banking sector, debt leverage is a common technique when they engage in daily activities. For example, In order to multiply the income and capacity of lending, they will issue bonds to raise its capital by borrow more money from other financial institutions and lend it to other parties by c harging at higher interest rate (EMAC Committee Members, 2010). Debt leverage is a favourable tool presuming there is no default exists in the whole process, and bank has collected back all loan issued, along with the interest imposed. Leverage contains high risk when the obligation is default. When bank is unable to collect back the money and they have to suffer the loss thereby no payment will be made to its creditors, especially when the bonds are due. For instance, this situation has reflected in recent housing bubble in US where the bank used depositors fund to lend it out to parties in real estate investment. When the housing price drops (biggest drop was 32.7% in year 2008) (Mantell, 2008) and the debtor does not payback the debt, the bank will lost all of its deposits and declare insolvency (Kalid, 2008). Apart from that, Murray (2011), argue that appropriate volume of leverage is allowable and can be use to increase the rate of return. However, if the business has exc essive amount of borrowing (overleveraged), it may has difficulties to finance the debts when it is due. A bank will be vulnerable when the level of borrowing hits certain level. Besides that, Peavler (2011) emphasized that the firm is running the risk of filling into bankruptcy each time they use debt financing. The higher level of debt financing, the higher chance the firm will bankrupt. Glantz (2003) proposed the use of debt to equity ratio (leverage ratio) to identify the risk of a company. The formula is given as follow. Leverage ratio = Debts Equity The definition of leverage ratio is that, the higher the leverage ratio means the company is using more debt financing source, vice versa. For example, if an institution has $10million in debt and $2million in equity, it is said to have a leverage ratio of 5.0. Thus, leverage ratio tends to indicate the level of the debt financing in a company. Fisher suggests the 2-to-1 of assets to liabilities ratio rule should be imp osed by company when come to financing decision, more than that could bring the company to fail (cited in Franczyk, 2005). However, this was objected by Franczyk, claiming that there is no fixed rule on the leverage amount; it has to depend on the nature of the company (Franczyk, 2005; Yahoo Finance, 2011). His statement was supported by other researcher, complex entity such as financial institutions and bank doesnt have standard ratio in leverage. Maudlin (2009) illustrated with some of the Europe banks especially in Greece, Italy, Spain, Portugal, Ireland and Britain were reportedly hit leverage ratio at 50:1 and yet they still surviving. He further pointed out these banks were heavily involved into Eastern European projects which currently faced financial difficulties and plummeted local currencies. EU Commission has growing concern on the ability of these banks to payback the debt. Generally speaking, debt leverage is favourable to business, but it is advised do not overlever aged. It is essential for business to use a balance between the combination of debt and equity financing (Biztrademarket, 2009). Regarding to this, McLaney (2006), proposed the traditional view of capital structure, where it indicates the effect of borrowing on Weighted Average Cost of Capital (WACC). WACC is an expression of a cost which is used to see whether the intended investment is worthwhile to undertake or not. The lower the WACC, the lesser risk the company bear (Chryanthou, 2008). Figure A: Traditional view of the effect of borrowing on WACC The traditional view of capital structure states that at the initial stage of company borrowing (gearing (UK) or leverage (US)), the advantages of cheap cost of debt and tax advantage will cause WACC to fall (Favourable). However, as the gearing increases, shareholder will demand for higher return for higher risk they bear (i.e., cost of equity rises). At the same time cost of debt also rises because the chances of company defaul ting on debt are higher. Therefore, WACC will increase (Unfavourable) and a U curve is created. Based on Figure A, the result is that, a minimum WACC is identified and that is the point of optimal gearing/leveraging level. The design of this structure tends to give the indication on how much leveraging level should be taken, also, in the attempt to reduce the business risk to the lowest possible point. 2.3 FRAUD CAUSES BANK FAILURE A series of financial fraud in the past has shaken the confidence in financial market. Fraud had been remains high and is one the leading cause of bank failures. How could fraud unnoticed at the first place? Appearances can be deceiving until its too late to reverse the situation. Some financial fraud contains signs yet investors and shareholders fail to observe the warning shown. Good judgement derive from experience, experience derive from poor judgement. An understanding on financial fraud is to look back at the history of fraud incident and successfully overcome the mistakes done. Financial fraud is a crime. The National Criminal Intelligence Service (NCIS) says more than 70 percent of doubtful transactions reported are contributed by banks (Murray-West, 2004). Those convicted with fraud will always walk away richer even though fraud has failed in the bank. Wilson (1999) noted financial scandal could happen again due to its temptation of attractive rewards to people. There is a n increase of financial fraud in US, UK and Asia. If fraud comes to rule the system, it will ruin the business. Ade and Wole (cited in Socyberty, 2008) stated that fraud is a virus spread from banking that might harm other sector. However, it received little attention they said. Investigation on fraud activities is important as the lesson of the consequences from dishonest actions can make aware to businessman, politician and regulators. Recognizing on types of fraud in the bank is important to sustain them in the long run. The few common type of fraud is insider lending, asset misappropriation, false accounting, bribery and corruption. Growing complexity of the bank has made way for fraud to be committed by any groups in the bank. For example, companys management, companys employees, third parties and customers may have involved on it. Insider fraudster is a serious threat to the bank in the words of a representative from Serious Fraud Office (Murray-West, 2004). Furthermore, Cull (2011) argues that lending to bank insiders is the main cause that leads to non-performing loan occurred. She pointed out bank prefer to make loans to their close associated or own shareholder which easier for them to monitor. But on the other hand, this allow insider borrower to transfer out money illegally when the credit crisis take place. At this point, the insiders have taken the opportunity to made loans and default it later on in order to sustain their own business organization. Many cases of financial fraud have involved individuals that outstanding perform in job. They are capable to transfer out large sums of amount from the bank. Ironically, the outstanding performing staffs that bring the most profit to the bank required the most observation. Palmer (cited in Murray-West, 2004) stated individual that has engaged in fraudulent transaction are those who greatly preferred due to higher ability to earn money for bank. Black (cited in Galbrait, 2010) stated financial fraud is likely to happen when you can be in charge of the bank. Given the authority to manage the bank, it is always easy to involve their self in fraud. Heineman (cited in Brigham and Linssen, 2008) stated CEOs are the individual that are responsible that contributed the fraud in Enron and WorldCom. Someone that is performing great will less likely to be question by public, other executives in the bank or shareholders. The management is clueless on how are those CEOs control the entity. They failed on handling accounting, finance, risk, legal, human resources, operational and boards. Other than CEO, individual such as Nick Leeson has brought down Barings Bank with fraudulent activities when top management did not question his activities in the bank (Pressman, 1988). Nick Leeson hides errors and losses in the hopes that luck may reverse while speculate the fake account to earn money with foreign currency. Asset misappropriation is the common and easiest to occur. An asset misap propriation includes payroll fraud, check forgery, theft of money and services. Statistics show that asset misappropriation made up to 91% but the least expensive fraud (Coenen, 2008). The founder of Independent Insurance and two of its executives has bought down Britains largest insurance companies. They were involved in off-balance sheet accounting which is keeping information on contracts away from the main system. False accounting has been very common that cause institution failures over the years. False accounting is often done by overstating or understating profit or liabilities to show a stable balance sheet. This is done to attract customers and investors. Palmer (2004) noted banks uncover questionable transactions in order to maintain their reputation on outsiders view. There is no incentive for bank to reveal the real information to customers and investors. The manipulation of financial statement can enhance the banks earning by making it more appealing and create more financial opportunities. Sarbanes (cited in Brigham Linssen, 2008) said public companies with good reputation are convicted into fraudulent practice to exaggerate profit and rise up stock prices with their auditors. However, the cost of false accounting is large and widespread. Matthew Piper lost  £60million in Morgan Stanley, one the largest investment bank when he overstated the profit. (Power, Edwards and Bloxham, 2008). Bribery and corruption include investment scheme fraud, bribes to influence decision-making, and manipulation of contracts. It is reported that bribery and corruption is cost more than asset manipulation. Two SFO were bribed  £800,000 to ensure loans of  £13m are successfully deal the owner of Facia (Murray-West, 2004).